Home > Event Coverage > Eurobike

Abbey Bike Tools Introduces THE Truing Stand w/ Optional Islandix Computer Readout System

Abbey Truing Stand
8 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

The newest tool from Abbey is here, and it’s a big one. After years of obsessing over the details about what would make the ideal truing stand, Abbey Bike Tools is finally releasing it into the wild.

The Truing Stand as Abbey puts it, is more than just a device to hold the wheel while you turn the nipples. Built from the ground up to allow for obsessively precise wheel building, the design is perfectly mirrored from side to side so you can build a wheel with perfect dish regardless of hub or rim width.

Image c. Abbey Bike Tools

Built with a substantial machined aluminum base plate, Abbey founder Jason Quade tells us that from the beginning, they wanted the foundation of the tool to be included – not some DIY option that was added after the fact. The 6061 aluminum base is an inch thick, and includes four adjustable feet that can be used to perfectly level the truing stand.

The arms are machined from aluminum as well and will accept thru axle hubs without the need for adapters. The truing stand will still accept standard QR hubs and bolt-on hubs with axles up to 14mm, but thru axle hubs can use the integrated cones eliminating the step of placing an adapter in the hub end caps. The cones will work with thru-axles up to 25mm as well, so even your old Maverick hubs will fit. It will also fit hubs from 70mm to 220mm in width, so even those who build fat bike wheels will be set.

And in the case that you have some crazy hub that doesn’t work with the existing stainless steel plates, Abbey can custom machine additional plates based on the need.

The dropout plate also features an insert for truing disc brake rotors from 140-220mm in diameter. Since the truing arms are mirrored from side to side, you could also swap the arms around if you wanted the brake truing indicator on the other side, and on the back of the arm.

Abbey Truing Stand indicator arms

At first, the indicator arms may look similar to the typical truing stand, but that ends when you view it from the back. Not only do the indicator arms ride on sealed bearings, but they are a push-pull design which makes it ridiculously fast to move through the adjustment range. The knob is so smooth and balanced, that you can give it a spin, and it will spin for another few rotations. Coupled with the fact that you can move the main arm that the indicator is mounted to without any sort of knob or dial, The Abbey Truing Stand should save professional wheel builders a good amount of time over the long run.

Igus drive bushing on threaded rod

The vertical arms use a linear rail system for incredibly smooth movement, which is helped by an Igus Drive bushing for the main lead screw. Abbey found that a different solution worked better for the pillow blocks, but the whole system is designed to run dry – no need for any lube or oil that will collect dust in the shop.

Image c. Abbey Bike Tools

When it comes to using the indicators themselves, they will fit rims 15-65mm wide, and tires somewhere in the 2.6-2.8″ range (the production indicator arms aren’t finished). The green 3D printed arms will be metal for production, and are not capable of being used individually, but if you want to use just one indicator, or need to work on rims wider than 65mm, you can use the single dial indicators on the red multi-adjustment arms to measure just one side of the rim. That same indicator can also be used to measure vertical runout – either below, or even on top of the rim in the casse that the tire is still mounted.

The truing stand will be sold in different configurations, one with a single ‘feeler guage’ type radial indcator, with either mechanical or digital Mitutoyo indicators, or with the Islandix digital system.

Abbey decided to work with Islandix to offer the system as an option after demoing the system themselves. Essentially a real-time digital output of vertical and horizontal runout, the system connects digital sensors to your computer or connected device so you can see a visual representation of the wheel build. There’s also a spoke tension component that can be added aftermarket, making it an impressive way to build insanely precise wheels. It also will run $2,350 for the full setup.

Islandix foot pedal

The kit also includes a foot pedal to work the system while you’re truing so you don’t have to take your hands off the spokes.

Abbey Truing Stand custom name plate

Abbey plans to sell the truing stand in batches, and is taking pre-orders for the first batch now. They expect to have only single digits of exess stock from each batch, so if you really want one, you should get in on the pre-order. Pricing starts at $1,450, and all models include a customized name plate – whether that’s your name, or a character from your favorite movie…

Base model with single radial indicator. Image c. Abbey Bike Tools

Pre-orders placed now should ship in September, with Abbey planning on deciding the size of the first run around July 9.

abbeybiketools.com

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

8 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
threeringcircus
threeringcircus
7 months ago

Want.

nooner
nooner
7 months ago

Looks like a very fancy way to measure rim runout. Does this device measure and record spoke tension as well?

Islandix Instruments
7 months ago
Reply to  nooner

With a compatible tensiometer (e.g. Wheel Fanatyk, Sapim, etc) you can record tension stats and produce graphs of spoke tension.

K-Pop is dangerous to your health
K-Pop is dangerous to your health
7 months ago
Reply to  nooner

The islandix system does measure tension, but requires an upgrade to add extra ports and a tension meter with a Mitutoyo gauge like the Wheel Fanatyk digimatic. You can run the tension feature with the normal two bay port if you don’t mind unplugging one of the rim runout gauges to free up a cable to read tension.

Raouligan
Raouligan
7 months ago
Reply to  nooner

“There’s also a spoke tension component that can be added aftermarket, making it an impressive way to build insanely precise wheels. It also will run $2,350 for the full setup.”

David
David
7 months ago

Now point me in the direction of a carbon disc rim with high enough quality to actually NEED such a precise tool.

Ingram
Ingram
7 months ago
Reply to  David

True, even wheelsets for rim brakes can have runout up to 0.3mm which is not perceptible in practice. But if a pro wheel builder needs the numbers to impress customers, then so be it.

Matt
Matt
7 months ago

Not bad, but if I were dropping that kind of cash on a truing stand, I think I’d still be looking at the P&K Lie.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.