Home > Bike Types > Road Bike

Review: BMC Teammachine R Road Race Bike

bmc teammachine r road bike being ridden
7 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

The BMC Teammachine R launched in October with the ambitious goal of being the perfect road racing bike. While I didn’t get to test it in a race, I did travel to the Circuit of the Americas race track in Austin, TX, to join BMC for test laps, plus a day of around-town riding on my own. Below are my impressions of the bike, but first, a bit about how it came to be.

Why did BMC partner with Red Bull?

bmc teammachine r road bike by red bull f1 pit booth

BMC’s racers wanted a bike that could handle the cobbles as well as the climbs, flats, and sprints, giving them a one-bike quiver for most races and stages. Having already collaborated with Red Bull Advanced Technologies (RBAT) to create their Speedmachine TT/Tri bike, they decided to leverage the beverage brand’s F1 experience and tech for this, too.

bmc teammachine r road bike by red bull f1 pit booth

So BMC went to Red Bull and said they had three criteria:

  1. It had to be as aero as their Timemachine
  2. It should have the same feel as their Teammachine SLR
  3. It had to be really light

RBAT gave them more computer simulation power, letting them test more tube shapes and layup schedules. Once Red Bull’s computers had their version of an ideal bike, BMC came in and tweaked it into something that could actually be manufactured at scale.

Drawing it Up

The initial renderings showed a more bulbous head tube, but it would have been heavier than the slimmer profile with flatter sides, because (BMC says) rounded, bulbous shapes need more carbon than flat shapes, at least in that particular application. And they needed it to “look” like a BMC, after all.

The end result is a bike that’s 19% faster than the SLR without a rider, 3.5% faster with rider, and 1.9% faster than Timemachine Road, all at 0° yaw in the wind tunnel.

closeup frame and cockpit details of bmc teammachine r road bike

While BMC isn’t calling it an “aero bike”, it is indeed a race bike that happens to be very aerodynamic.

closeup frame and cockpit details of bmc teammachine r road bike
They call this the Mariana Bottom Bracket shell. Because it’s deep. Like the trench.
closeup frame and cockpit details of bmc teammachine r road bike
Little things like covered thru axle threads add marginal gains…and good looks.

Full tech details are in our launch coverage, but the key aero features are:

  • Slim headtube and frontal profile
  • Extremely wide spacing between fork leg and spokes
  • Deep, long bottom bracket section
  • Integrated bottle cage that shapes airflow over water bottles
closeup frame and cockpit details of bmc teammachine r road bike

They say with the fork, you either want to be extremely close to the wheel and tire, or really far from it. It’s safer and easier to go wide, and that allows more rim and tire compatibility.

closeup frame and cockpit details of bmc teammachine r road bike

They spec a 1700g wheelset with 62mm deep rims, so you could go lighter, but they chose these specifically for the aerodynamics.

The bike is also really light, only ~50g heavier than the SLR. Claimed frame weight is 910g with a 345g fork. They did this by reducing overlap between plies with more custom-cut pieces of carbon, using less where it’s not needed and a little more in the head tube and BB area for improved stiffness.

BMC Teammachine R ride review

closeup frame and cockpit details of bmc teammachine r road bike

The Circuit of the Americas track is an excellent testing ground for this bike. Each 3.4 mile lap has 20 turns, one big punchy climb, and what seemed like a constant headwind. Powering down the straightaways, standing to hammer up the climb, or diving into corners and S-curves were all great. It’s stiff, efficient, and handles great, as I’d expect from a race bike costing $14,999 in top trim. (Complete bikes start at $9,199, frameset with cockpit is $5,999)

closeup frame and cockpit details of bmc teammachine r road bike

Whether drafting others (or flatbed tractor-trailers with tourists on the back) or pushing past them for a solo effort, the bike clearly likes to cheat the wind.

As BMC’s own numbers suggest, though, the rider is still the biggest source of drag. So they gave the bike very narrow handlebars. All size frame sizes, from 47 to 61, come with the same one-piece bar stem measuring 360mm wide at the hoods. It flares to 420mm in the drops.

The point is to keep a rider’s arms narrower, creating a smaller frontal profile. As a bigger rider with broader shoulders who typically rides 440mm wide handlebars, I was surprised that this didn’t bother me. At least not given the bike’s intent. Were I buying this for all-day riding and training, I’d want something wider. But for racing, this spec makes a lot of sense and wasn’t uncomfortable.

Smooth Off Track Too

bmc teammachine r road bike on gravel bike path

What surprised me about the Teammachine R is how well it rode once I got off the perfectly smooth asphalt of a Formula One race track. I took it for a late morning ride out of downtown Austin, where the roads are less than perfect. Potholes, construction zones, and city streets. And then a less congested ride along their bike paths straddling the Colorado River.

With loose scrabble to hard-packed dirt, the trail is the kind of thing I’d normally take an all-road or gravel bike on. But the Teammachine R, for all of its stiff hi-mod carbon, didn’t beat me up. If their team wanted something that could handle cobbles, this was the closest I got to suggest BMC delivered. The only limitation for mere mortals like me is its claimed 30mm tire clearance. However that seems to be the preferred size for the pros racing Paris-Roubaix, so… it’s fine.

bmc teammachine r road bike on a taco ride

If you’re looking for a purpose-built all-around race bike that doesn’t skimp on any of the three key criteria (aerodynamics, weight, ride quality), the BMC Teammachine R is worth a look. It’s even fine with the post-ride taco truck stop, which earns it an extra nod from me.

BMC-Switzerland.com

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

7 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Jason DW
Jason DW
2 months ago

$15,000…. It better be a nice bike.

Raul D
Raul D
2 months ago
Reply to  Jason DW

I wouldn’t want to be seen out getting tacos on anything less. It is surprising to think RedBull has some sort of tech cred, I’ll have to check into that.

Mitch
Mitch
2 months ago
Reply to  Raul D

RedBull Motorsports has a ton of tech cred. Look up Adrian Newey, and he’s only one part of the team.

Evan
Evan
2 months ago

I don’t believe in the benefits of super narrow bars, but even if I did, I would not believe in putting every rider on the same width. How did they spin that particular cost-cutting measure?

Alex
Alex
2 months ago
Reply to  Evan

I agree but do like the bike and would just get a set of Darimo bars for it if I was crazy enough to waste that much money on a bike such as this.

Tom
Tom
2 months ago
Reply to  Evan

you either believe that the narrow bar phenom is nonsense, or that the convergence of bike makers on the narrow solution is born out by wind tunnel data. I believe the latter, though I haven’t converted all my bikes to narrow because I don’t care all that much, certainly not enough to go through the hassle and expense. I’d certainly consider building a bike with 38s, having ridden 44s early in my cycling career.

Evan
Evan
2 months ago
Reply to  Tom

Actually, I believe both things. What I don’t believe is that the position assumed by a dummy in a wind tunnel (or even a human in a wind tunnel, for a handful of minutes) is the same as the position that is realized while out on the road. The squeezed up position is uncomfortable and elbows ultimately bow out. I see it every Saturday on the group ride.

Bike manufacturers are “converging” on narrower bars only in cases where their marketing team wishes to claim aerodynamic benefits for a new bike over an old bike. Vast majority of road bikes are still sold with the traditional width bars.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.